I just tested it on a Toshiba laptop and the wireless LED lights up when I turn on the switch even when the hard drive is removed. STEP 1 Carefully remove the keyboard bezel using a small flathead screwdriver. Could that be the problem. Once I had removed the screw the DVD slid out easily. Maybe you have too many applications running at the same time, maybe you have a virus or spyware clogging the system, etc… Have you tried reinstalling Windows from scratch?

Uploader: Faele
Date Added: 8 August 2006
File Size: 43.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58031
Price: Free* [*Free Regsitration Required]

Or if anyone has done this or had the same problem. I have also seen that, in the most sony pcg-k45 cases, you have to leave the card in AND disable it in Device Manager obviously the card slot then cannot be used.

You can remove the keyboard and sony pcg-k45 xony look at the slot. If still no light, apparently you have a bad wireless card. Anyways I put it back together and it wouldnt start.

pcg-k54 Hi, In reference to 39 and Stripped it and found the slot, installed the card and antenna. You can break a connector but not sony pcg-k45 cable.

Even though the laptop get heated very much the system operation is very smooth. Sony pcg-k45 are pcg-45 1, 2 and 3. Clean old thermal grease from the CPU and apply new pcg-kk45. Did you separate the sony pcg-k45 sink from the CPU during the laptop disassembly?


Thinking it was a virus or something, I used the recovery disks I had made years ago. A friend said that I needed to replace the disk. I tried different compatible RAMS sony pcg-k45 still the same problem.

14.8V 4400mAh Replacement Laptop Battery for Sony VAIO PCG-K45

It will power up and stay on if sony pcg-k45 is on the BIOS screen. So I replaced the battery…and come to found sony pcg-k45 at geek squad they told me it was the power jack not being able to give the full attention from the adaptor.

When I power it up the pc-gk45 logo come up but soon as windows xp loads the sreen gose black. Thanks in advance Angel xx. I guess I can still unsolder the guts sony pcg-k45 the old power jack and then solder the wire back on sony pcg-k45 the new one?

Make sure the laptop detects memory in each slot. I can boot off a Linux CD, and the sytems stays on. I assume you are using the laptop on a flat surface and air intakes on the bottom are not blocked, right?

What would you reccomend be my next course of action? I searched for a picture of pcg-45 heatsink and Sony pcg-k45 found this one: So if I sony pcg-k45 only one of the new modules I get MB. Also, after you get them apart, be sure to clean off the old thermal compound with some rubbing alcohol before applying new grease….

Related Driver:  UJDA755 DRIVER FOR WINDOWS 7

How do I turn my sony pcg-k45 on again? Also it will run well on battery until it dies but if I plug the AC adapter sony pcg-k45 while it is running it will inexplicably shut down as though it lost all battery power.

Do you have any idea how to resolve this?

Sony eSupport – PCG-K45 – Support

If sony pcg-k45 starts let go of the cpu and take it all apart and try fitting it in tightly so it starts Up again. Is it for PCG-K series?

You can clean the heat sink with compressed air. Like I said before, it can happen a few seconds after turning wony on or a few days.

Thank you very sony pcg-k45.


Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top